Two-phase flow regimes and mechanisms of critical heat flux under subcooled flow boiling conditions Jean-Marie Le Corre Shi-Chune Yao Cristina H. Amon 10.1184/R1/6490238.v1 https://kilthub.cmu.edu/articles/journal_contribution/Two-phase_flow_regimes_and_mechanisms_of_critical_heat_flux_under_subcooled_flow_boiling_conditions/6490238 A literature review of critical heat flux (CHF) experimental visualizations under subcooled flow boiling conditions was performed and systematically analyzed. Three major types of CHF flow regimes were identified (bubbly, vapor clot and slug flow regime) and a CHF flow regime map was developed, based on a dimensional analysis of the phenomena and available experimental information. It was found that for similar geometric characteristics and pressure, a Weber number (<em>We</em>)/thermodynamic quality (<em>x</em>) map can be used to predict the CHF flow regime <p>Based on the experimental observations and the review of the available CHF mechanistic models under subcooled flow boiling conditions, hypothetical CHF mechanisms were selected for each CHF flow regime, all based on a concept of wall dry spot overheating, rewetting prevention and subsequent dry spot spreading. Even though the selected concept has not received much attention (in term or theoretical developments and applications) as compared to other more popular DNB models, its basis have often been cited by experimental investigators and is considered by the authors as the “most-likely” mechanism based on the literature review and analysis performed in this work. The selected modeling concept has the potential to span the CHF conditions from highly subcooled bubbly flow to early stage of annular flow and has been numerically implemented and validated in bubbly flow and coupled with one- and three-dimensional (CFD) two-phase flow codes, in a companion paper. [Le Corre, J.M., Yao, S.C., Amon, C.H., in this issue. A mechanistic model of critical heat flux under subcooled flow boiling conditions for application to one and three-dimensional computer codes. Nucl. Eng. Des.].</p> 2010-02-01 00:00:00 Mechanical Engineering